Author: Jeff

I’m tied up at the downtown boardwalk. Love this place.

I slept in this morning and got underway about noon. Had a nice jib reach all day, traveled about 60 nm. Overcast and heavy rain for about an hour. It cleared up as I got into Little Current about 8:30.

It’s beautiful around here. There are still lots of spots I want to stop and visit. Another time. I’m enjoying the sailing and the nice weather, so decided to head down Georgian Bay tomorrow.

About the only thing on my provisioning list is a new hat. I left mine in Thessalon. Mallory has it, but that doesn’t help with my immediate need.

Some pics from today. No video.

Well, this has been fun. Great sailing all week.T

Tuesday I made a brief video sailing north from Chicago.

I finally packed up and got underway Tuesday morning into a dying northeast wind. Basically one long starboard beat up the shore until it got very light just off Kenosha. I pointed the bow out into the lake and napped for about 3 hours starting at 4 am.

Wednesday was calm until a SW breeze slowly started filling in late in the morning. I motored slowly 5-6 hours towards Frankfort. Finally when the following breeze reached our 5 knot boat speed I started sailing.I was watching the wind forecasts and the prediction was for the wind to gradually increase to 12-25 knots over the next couple of days. Same direction. Nice sailing conditions. But I had nagging doubts about sleeping when sailing at speed. So when a big shift allowed me to speed towards Ludington about 20 miles away I took it.I made a brief video while heading for Ludington. Didn’t tie up but went up to the head of the inlet and dropped anchor and had a nice sleep.

Thursday I got underway late morning, and had a spectacular 24 hour sail up the shore to the Straits of Mackinac, where I took down the spinnaker and reached over to Cheboygan. Tied up at the municipal marina mid morning. I should keep a better log. Not sure how far or fast, but it was about 160 mm straight line distance.

Friday was a lay day. I wondered into town, had a meal out, chatted with some J35 folks and crashed. It stormed a bit overnight, with some pretty good gusts.

Saturday I sat around drinking coffee for an hour or two – a luxury when cruising Tin Lizzie – while waiting for the winds to moderate a bit. I keep this aboard but it’s not the same.I had a spectacular spinnaker sail across to Canada. Video here. Sailed into Thessalon and met by chance a boat from Chicago with a crew that I knew and enjoyed their hot food and cold beer. Nice way to end the day.

Sunday (today) I had lunch out with Mallory. She had the day off from the camp and drove about an hour to the boat. Nice. I got underway mid afternoon and in light winds sailed down to East Grant Island where I’m now anchored here. Nice spot.

I had two lovely sails Sunday and Monday, both solo. Sunday was 10-15 knots NE with 3-4 ft waves. Monday was 5-10 knots.

The boat sails beautifully in those conditions. Fast and responsive to tweaking. I let the AP steer always, and it performed brilliantly apart from a few hiccups on my side. I need to get more comfortable with the controls and capabilities for maneuvers like tacks and gybes, but it got better each time. I used the water ballast and it makes a big difference. The new valve system works perfectly.

The armored tablet is brilliant. I keep it on and mirroring the MFD, and hang it from my neck or over a winch or in the rope bin.

At this point I’m done with electronics, safety, and sail handling. Interior is clean and decluttered and I’m making lists of provisions needed to set out for a month. I’m going to try to get some bins to keep things aft. Maybe milk crates. I’ve been seriously thinking about a beanbag chair for sleeping. Lotta hard edges on this boat.

After I took the sunset selfie I shot a brief video while reaching with the spinnaker. Boat was sailing itself at 6-7 knots in 5-8 knots of wind and I was just enjoying the ride.

I did get a little queazy on Sunday, but only for a few minutes. It’s hard to go below when it’s rough. But I have a few great spots to hang out in the cockpit. After I perched on the high corner for a few minutes and got busy tweaking I felt fine.

I feel like we’re ready – me and the boat – to hit the high seas.

I launched Tin Lizzie Saturday

All is in good order. There’s very little left to do. I finished installing the new wind and speed instruments, and everything is on the network and appears to be functioning well.

As I discussed earlier I really want to get sailing before I start mounting instruments. After I removed the big Ockam Matrix display I was left with a rectangular hole. So I temporarily mounted the heads over the hole.

That’s rigid pink foam. I used 4200 to mount everything. The only new hole was 1″ for the lower head.

I took advantage of a the time ashore and the nicer weather to dry everything out, clean the interior, and start to get the inside organized. Thinking about what I need to take when I leave here and how to store it. I think most of the stuff is going to end up aft in the quarter berths.

After much fussing with the ballast system everything is perfect. I replaced the line driven valve controls with 3 push/pull cable controls. Here’s one of the handles in the cockpit. They’re normally closed (in) and are well protected by the line bins.

The rudder blade was easy to patch up. There is a slight binding in the top bearing and I suspect the shaft is not perfectly straight between the bearings but it will be OK.

Now to get some sailing in!

I started a long shaggy dog story about the rudder. If anyone wants more details let me know.

The short version is that I hauled TL two days before the Chicago – Mac solo race start and discovered that the rudder shaft was bent.

We managed to straighten it the next day, thanks to the crew here and John Lamonica, a friend of the yard who took me and the rudder to his shop where we worked with a press from 1941 University of Chicago. But I was troubled by the root cause and only marginally ready to go before losing a day. So I bailed on the race and went home for a visit. I’ve been living pretty rough in the boat yard and was ready for some family and greenery.

After extensive consultation with a bunch of smart experienced people it seems pretty clear that the stock bent during our wipout(s) when trying the autopilot in fast spinnaker conditions.

The rudder has survived the trauma. Sarah and I reviewed the construction and dye tested the shaft, and it appears to be as good as original. There is no obvious way to strengthen it without going to a new rudder and likely replacing bearings to accommodate a larger shaft. Sarah assures me that it’s unlikely to snap off, which was a fear earlier.

I’m now back in Chicago. Spent today touching up the rudder, installing the new wind instruments, and cleaning up. Will be back in the water this week.

Note the new boom cover. Price was right :-). The old name and the beneteau seahorse have got to go…

I decided overnight not to do the Chicago – Mac race. Looks like nice conditions for a fast tame race. But Tin Lizzie isn’t quite ready.

I’m fine with this. The plan all along was to do some stress testing locally before setting out. It may sound brutal, but you don’t want to start worrying about a failure when you’re alone, tired, and caught in a squall in the middle of a big lake. Or focused on passing a Frers 53.

I have an increasingly focused game plan for remediation and lots of support here. Going back to Canada for a bit of a break, then back to the Tin Lizzy project. Stay tuned.

Wishing fair and safe passage for the two dozen sailors setting off tomorrow morning.

As a new entrant to the GLSS events I was required to complete a solo passage on Tin Lizzie that was at least 24 hours and 100 nautical miles.

I completed that last night. Left Tuesday evening around 10 pm and got back in at 3:00 this morning

I picked a nice weather window – light winds, no rain. There was fog for the first half, but yesterday was pleasant and sunny.

It was a useful exercise. I managed to sleep a couple of times with alarms set, but slept through one of the alarms. Need to make sure that I have something that rouses me.

Boat performs well. When I realized half way through that I was going to have trouble making 100 miles I started just trying to go fast in whatever direction I could, which meant spinnaker reaching. So I did a bunch of hoists, douses and gybes to work out my procedures.

The autopilot works very well. I have ordered new wind instruments that will be here tomorrow. Lots of final things to do before I leave Friday afternoon, but doable.

As expected I used my tablet extensively inside and out. I’ve ordered a waterproof and tough tablet. The AP remote worked reasonably well, but I’ve got a bit more fiddling to do. And I’m replacing the valve system for the water ballast.

I took a few pics. This is me in one of my cockpit napping stations, comfortably lying on a spinnaker

Got a new harness/pfd that is very comfortable and have my tether points all figured out.

More sailing shots. The sunset under the spinnaker has the Chicago skyline. Look close. Saw one other boat in my time on the lake.

The T10 main is better suited to my intended use. Quite a bit smaller than the class main, which has a huge roach. But much easier to handle solo and I won’t worry about thrashing it to death.

Weather here has been lousy. Currently raining, grey and temps in the 50s. But the weather is looking pretty good for the weekend, warmer with moderate reaching winds.

I’m feeling confident that I’ll make the start reasonably well prepared, but it’s still going to be a last minute effort. That’s the way I roll.

Yesterday shook me up a bit. I’ve been thinking about my concerns and how to manage them. Some are general, some are specific.

Working backwards, I need to leave the dock here Friday noon fully provisioned and ready to race. Start is Saturday morning.

In general, I have confidence in the boat. There are a few mechanical items still on my to-do list to ensure reliable diesel power for charging and propulsion, but apart from that the basic boat is ready. Rig is fine, electronics are fine, safety gear is fine. Got a nice harness and dual tether today as well as a bit more required equipment.

My biggest concern after yesterday was the mainsail. Not the damage, but the realization that it was too much for me to handle solo. So I don’t mourn its passing.

I’ve been reluctant to just add slugs to the other main. I’m not sure I could do it in time, and I’d like to be sailing. Plus I wouldn’t mind a smaller and/or more cruisey main for distance racing, at least at this point in my development. Don’t need to kill a good racing main needlessly.

After some research I found that the Tartan Ten has a main that’s maybe a foot short on the hoist and 6″ on the foot. And there are T10 mains kicking around here that I can beg, borrow or steal. I’m hoping I can try one out tomorrow.

My second concern is getting peak performance from the autopilot. And I think that requires a wind input. I went carefully through the legacy Ockam system today, and discovered that there is no output that I can feed to the AP. So I’m weighing either a) leaving as is, b) replacing masthead wind sensor, which would mean shutting down the Ockam system and installing a couple of MFDs in the cockpit, or c) installing a network compatible wind unit on top of the radar and leaving the existing ockam system intact. Leaning towards b but with time and budget concerns. If there is a cheap expedient option for c I’d jump on it but think b is the right solution.

I’m super excited with the boat, but have to make sure I can keep it under control and take care of myself. That’s mostly what I’m thinking about now.

Weather continues to be weird here. Raining today. I’m watching the long term forecast anxiously. At this point it looks like a fast race. I just hope it’s not too fast 🙂

It also occurred to me while recapping yesterday’s sail that I was pretty single minded in testing and learning and didn’t pay much attention to the comfort and security of my guest. Sorry Bob. Hopefully we can have a more relaxed sail another time.

Still have to fit in my qualifying sail as well. Down to the wire… Fortunately the weather looks settled for early next week. Plan is to head out midday Monday.

My old friend Bob is in Chicago for a few days and I promised him a sail. Today was lovely, sunny, not too cold and a 15-20 knot SW breeze with some heavier puffs.

I haven’t gone out sailing in more than a week. Was busy getting all the electrics and electronics sorted, and have been helping with a couple of projects in the boat yard, including helping to re-commission this Southern Cross 52. It’s a cool boat, like a giant Tin Lizzie.

I picked Bob up downtown, then we sailed there from Calumet. Put up the reaching spinnaker for a fast ride north.

I wasn’t having any trouble keeping the boat under the rig with the sheets cleated on a broad reach while hand steering. The spinnaker is pretty forgiving on trim. We were blasting along at 10-13 knots. The autopilot didn’t do as well. We had a couple of slow motion roundups under AP. It took a bit of doing to get the boat going back downwind. I’m sure filling the windward ballast tank would have helped a lot.

A few times we sailed through the back of a wave and took solid water back to the cockpit. Pretty fine bow. Again, I’m sure ballast would have helped.

Bob and I had our PFDs on. I was wearing my auto-inflate vest and he had a house vest on.

I was trying to do things myself, and was on the leeward side trying to get the spinnaker sheet under the boom in preparation for a takedown when we broached again under AP. I found myself lying in the water with the lifelines under me, looking up at Bob who was clinging to the high side. The cockpit is close to 10′ wide at that point.

My life vest inflated with a big pop, and that didn’t help my mobility. So I focused on staying inside the boat, grabbing a stanchion and kicking around to make sure I was straddling the middle lifeline.

After a few seconds the boat popped up to maybe a 30 degree heel, Bob reached down to help me get back up, and we were off again. I stayed at the helm and instructed Bob on the takedown.

We reached into Monroe Harbor under main, and I dropped Bob off and sailed back to Crowley’s. If I’d been ambitious I would have put a reef in and raised the small jib, but I’d had enough action for the day.

The old main is toast. We gave it a good thrashing and it now has three or four major holes and a torn batten pocket. It’s more tired than I had originally thought. I’m also very concerned about my ability to handle the sail while hoisting and dropping. It’s a big sail with long battens. I guess I’ll be exploring having slugs put on the newer main.

Sorry no pics. I had wisely emptied my pockets of electronic devices on the way out.

I’m quite happy with the remote for the AP, and my nav area that I’ve built.

I was thinking about jack lines today and think I have a plan. Will run them tomorrow and pick out a harness and tethers. I want to make sure I fetch up inside the boat if I get thrown or swept the wrong way as I did today.

I wasn’t originally planning on a challenge of this magnitude. It’s pretty cool to think I could be sailing straight up the lake right now with average speed into the teens. But hard to imagine it being sustainable all the way.

I do want to try to get wind data to the autopilot. Everything I read says it’ll help, particularly down wind. I really don’t want to be steering.

I also still have to do my 24 hour solo sail. Weather looks fair and gentle starting Sunday so will likely head out then.

Here are some pics of recent work. I bought some stick-on dimmable LED lights and hung the AP remote holster and VHF mic at the companionway.

A new Balmar 70 amp alternator and external regulator. Have a new group 31 AGM battery and Balmar SG200 monitor, which allows me to monitor consumption and charge rates and battery SoC and health. There is a switch at the nav station that reduces full power alternator output by 50% as it’s only a 9 hp motor. So I can do heavy bulk charging when sailing but cut back when under power.

Radar seems to work fine when heeled. I also mounted a new GPS antenna, as the reception inside the boat is terrible.

I changed the running lights to LED. Also mounted a second antenna to the stern rail, normally dedicated to AIS reception but available for VHF if dismasted.

This is my emergency power supply, has 12 with jump and USB.

No pics, but with the exception on the old wind instruments everything is networked on NMEA 2000 and/or Seatalk NG and I’ve combined the two into a single network. Seems to be working as expected. Using routing to drive the AP is not allowed in GLSS events, and I haven’t tried it yet but assume it will be functional. Lots of data to play with!

I installed new electronics in Mazurka last fall, and had a lot of experience using them over the winter. They bring impressive capabilities.

As I was developing a use case for Tin Lizzie I started thinking about electronics almost immediately. An early decision was to share stuff between the two boats. I don’t have any plans to use them simultaneously. So I brought the radar and MFD with me from Mazurka. Left cables in place and installed new cabling in TL. Manfred built a very nice radar tower on the transom.

An autopilot is a necessity. I’ve been consistently impressed with Raymarine/Autohelm over the years in sailboats, and the unit on Mazurka has performed flawlessly except near big metal things like bridges and that one barge.

I might have gotten away with a unit that sits in the cockpit and connects to the tiller, but really didn’t want to. So I opted for a Raymarine ev200 with a linear drive. That required cutting a section of the stern tube out, keying the shaft, installing a tiller arm, and putting a gaitor seal over the shaft. Manfred did most of that as well. I’m very pleased with the final installation and have high expectations for the AP.

There was no VHF on the boat. I installed a masthead antenna. I didn’t bring my VHF, as I wanted a more modern unit that could communicate with the MFD better than the unit I got last year for Mazurka. I got a Standard Horizon GX6000. Pretty fancy unit. I brought my RAM mike from Mazurka and got new cabling for Tin Lizzie.

There is an old Ockam system on Tin Lizzie that gives boat speed, wind information, and depth, along with calculated information like VMG. It was bleeding-edge in its day. I thought I’d try it out.

After finishing up the drive install, I turned today to the cabling and placement of the displays and controls. Unpacking boxes, reading installation instructions and owners manuals. Getting a good handle on the NMEA2000 network topology. Once I discovered that it’s a CAN bus like my old Prius everything clicked.

My main focus is on the backbone and making sure everything is talking to everything else. I’ve pretty much decided not to cut any holes in the boat for instruments until I’ve sailed it for a while. On deck I’ll have a wireless remote control for the AP, remote mic on a long flexy cable, and the existing Ockam displays. I’m tucking the heads under the companionway.

My original plan was to try to feed boat speed and wind data from it to the bus, which requires a network adaptor and k knowledge on setting it up. But the more I look at that and contrast it with a new package from Garmin that isn’t that expensive and would play seamlessly with the other devices. I’m often guilty of this kind of scope creep. But I’m already behind schedule and over budget, so I may just leave it as is and plan a future replacement. Race starts in less that two weeks. Gulp.

I’ll post some pics when I’m done.